MMiP: 19
Firefly class: Serentiy
Based from images provided by: http://www.alexkung.com/scale/serenity/cmain.htm
Other useful info at: http://www.fireflywiki.org/Firefly/Serenity

I have no real instructions other than print/build a pdf at a time. I used 110lb for the entire model other than solar panels I used 1mm. Landing gear legs and all shallow curves were coated with 3-4 thin coats of elmers wood glue. This was done to either strengthen the joint or prevent from 'popping' inward. In the pictures you can see I used pennies at one point. Originally I had designed them to be 'rare earth magnets' to allow multiple postions of the side engines, make sure to extra re-enforce the surfaces if you use magnets. I threw an extra layer on the cargo doorthat was slightly bigger to allow it to close but not inward. To mont hte solar panels I used bits of foam core to raise the panel off hte surface of the ship.

You can read some more build notes in my blog: http://www.paperworlds.com/forums/index.php?automodule=blog&blogid=8&
Feel free to ask any question in my blog or email me direct at: armorbimbo@aol.com I will also post any direct emails in the paperworlds forum so that everybody can benefit.