___Ghostbusters HQ Inside Papercraft___


You'll need:

- hard paper
- normal paper
- scalpel
- glue
- a printer


GENEREL TIPPS:

--- print as large as you can with your printer.
I used usual A4 format and set it as large as possible.

--- use hard paper or else some parts like the stairs will kill you.

--- Slit the lines you have to fold slightly beforehand with the skalpel.
This will make it alot easier to fold them correctly.

--- If you find something is too long, just cut it shorter but don't forget to include the
glueing straps.

--- For the stairs, you can cut off some steps if you find them to be too many to fit in.

--- If you have any problems look at the finished picture or feel free to cantact me.
    (scroll down for contact information.)


INSTRUCTION:

First print the FLOORPLAN and cut it out.You can see the basic things marked on it.
You don't have to glue everything exactly on the marked spot but try to hide the
the lines or glue some grey paper over them later.

Next print the main wall (WALL_1) and the backwall (WALL_2)
and glue their straps under the floorplan and fix them together.
Then print the other parts of the wall (WALL_2 and WALL_3) 
and glue them onto their spot.

Now you can go on as you like.
I went on with Peter's office, Janine's desk and the lockers.

The hardest part for me, were the stairs.
First build the outside of it, then fold the stairs back and forth and glue them in.
At the end glue every part together and onto the floor.
Best build the first large step with the first steps seperately and add them to the floor at the end.
Also add the handrails at the end.

For Ecto-1 first cut out the sides of the car. You can print them again on normal paper and glue
them together if you don't want to have a blank spot at the inside of the wings.
Next cut out the long part and fold it as marked. Glue it exactly onto the silhouette of the sides.
Last, add the boxes on the roof.

---------------------------------------------------

I know it's hard, don't give up! : D
Problems? Contact me:

deviantart: NessaSan
MSN / Windows Live : run_tao_chan@hotmail.de
Mail: run_tao_chan@yahoo.de